NEw MaRINE ENGINE - 5.7L/350ci New Marine Engines

5.7L Complete Volvo Penta and OMC Style Sterndrive Inboard Marine Engine

New Marine Engine

Model : E5.7V-VR2

Description : This is a NEW 5.7L complete engine package. This 5.7L complete engine package is ideal for replacing most 1992 and later Volvo Penta and OMC 5.0L and 5.7L marine engines.


Displacement 350 C.I.D. (5736 CC) / 5.7L
Cylinders 90 degree
V-8 Cylinder
Compression Ratio 9.4:1
Valve Config Overhead valves (2 per cylinder)
Valve Lifters Hydraulic Lifters
Bore x Stroke 4.00" x 3.48" (101.60 x 88.39 mm)
Main Bearings Cast iron GM232-M
Ignition included
Flywheel Diameter 14" (ring gear towards engine)
Firing Order 1-8-4-3-6-5-7-2
Oil pan capacity 5.5 Quarts with filter
Horsepower 292 H.P. @ 4800 RPM (carburetor)
Torque 370 lb-ft @ 3200 RPM
Warranty 2 year limited (Commercial 90 day)


  • New 2010 5.7L GM Marine base engine
  • High rise aluminum intake manifold (Carb application)
  • Holley 4160 carburetor (USCG approved, Carb applicator)
  • Electronic fuel pump and fuel lines
  • Complete ignition system
  • Volvo Penta late style center rise manifolds and risers
  • 14" flywheel and Volvo Penta or OMC Style Coupler
  • High torque bottom mount starter
  • 95 Amp alternator
  • Flame arrestor
  • Weather cover
  • Fuel water separator
  • Single sender package
  • E-Z oil drain
  • Corrosion resistant black urethane paint
  • All pulleys, hoses and belts

Options Replacement For:
Fuel Injection
Fresh water cooling system
Power steering
Most 1986 and later Mercruiser, OMC, Volvo Penta, Marine Power, etc.