NEw MaRINE ENGINE - 5.7L/350ci New Marine Engines

5.7L Complete Volvo Penta and OMC Style Sterndrive Inboard Marine Engine

New Marine Engine

Model : E5.7V-MR2

Description : This is a NEW 5.7L complete engine package. This 3.0L complete sterndrive package is ideal for replacing most 1991 and earlier Volvo Penta 5.0L and 5.7L engines


Displacement 350 C.I.D. (5736 CC) / 5.7L
Cylinders 90 degree
V-8 Cylinder
Compression Ratio 9.4:1
Valve Config Overhead valves (2 per cylinder)
Valve Lifters Hydraulic Lifters
Bore x Stroke 4.00" x 3.48" (101.60 x 88.39 mm)
Main Bearings Cast iron GM232-M
Ignition included
Flywheel Diameter 14" (ring gear towards engine)
Firing Order 1-8-4-3-6-5-7-2
Oil pan capacity 5.5 Quarts with filter
Horsepower 292 H.P. @ 4800 RPM (carburetor)
Torque 370 lb-ft @ 3200 RPM
Warranty 2 year limited (Commercial 90 day)


  • New 2010 5.7L GM Marine base engine
  • High rise aluminum intake manifold (Carb application)
  • Holley 4160 carburetor (USCG approved, Carb applicator)
  • Electronic fuel pump and fuel lines
  • Complete ignition system
  • Volvo Penta early style center rise manifolds and risers
  • 12 3/4 sterndrive flywheel and damper plate
  • 95 Amp alternator
  • Flame arrestor
  • Weather cover
  • Fuel water separator
  • Single sender package
  • E-Z oil drain
  • Corrosion resistant black urethane paint
  • All pulleys, hoses and belts

Options Replacement For:
Fuel Injection
Fresh water cooling system
Power steering
Most 1986 and later Mercruiser, OMC, Volvo Penta, Marine Power, etc.